How to Use a Desoldering Pump: Beginner’s Guide

You’ve bumped to the right online guide if you want to learn how to use a desoldering pump, also called a solder sucker. A typical PCB is with many electronic components. They are held in place on a board by a solder flux. It can create a lasting bond between the pins of a part. On the other hand, desoldering involves removing the solder from the board. In the following, we’ll discuss the easy steps on how to use a desoldering pump to desolder.

See more: Best Solder for Electronics

How to Use a Desoldering Pump?

The process is quite easy. You just need to familiarize yourself on how the device works, and the rest will come easy. Check out the following to get started.

  • Prepare the desoldering pump

    Prepare the desoldering pump. Use a good one. If you’re buying it first time, make sure you’re getting a solder sucker from a reputable source that offers its guaranteed durability. It will also be wise to pick a solder sucker that receives positive feedback from users. Reading reviews can help, too.
  • Get a feel of how it works Desoldering Pump

    Get a feel of how it works if it is your first time to using it. In most cases, it will not be hard because it’s a simple and easy to grip and use tool. Test the desoldering pump by pressing the plunger. You will hear is click in place.
  • apply pressure on the plunger, and then press it down

    You must apply heat to the solder using a soldering iron. However, you can also find a desoldering pump that has irons included. Next, you must apply pressure on the plunger, and then press it down.
    Once the solder has liquefied, you can put the pump’s head on the solder that you should remove. You can then discharge or release the bulb or plunger. There are soldering pumps that come with a release button for added convenience, too.
  • Repeating the process will allow you to remove any additional solder

    You must apply heat to the solder using a soldering iron. However, you can also find a desoldering pump that has irons included. Next, you must apply pressure on the plunger, and then press it down.
    Once the solder has liquefied, you can put the pump’s head on the solder that you should remove. You can then discharge or release the bulb or plunger. There are soldering pumps that come with a release button for added convenience, too.

[A solder stays in a liquid form especially if it is in huge blobs. They are easier to remove. In this case, it can help to add solder to the joint if trying to remove any additional solder.]

There you the easy steps on how to use a desoldering pump or solder sucker. The next time you need to use it to remove solder, you can do it easily using these steps.

What Are the Advantages of Using a Solder Sucker?

You can find different solder suckers, such as electronic and manual types. On the market, there are also heated guns available. A solder sucker has a simple design that allows its easy access to the small areas. It is also ideal for removing solder from a very small opening.

Many prefer salvaging used circuit boards and electronic kits because it is a more practical thing to do. After all, these are expensive. Learning how to desolder will help keep the cost down, while also not destroying a circuit board. This process helps in sustainability while also saving on the cost to spend on electronic kits and boards.
Using a solder sucker ensures that you can work faster than not. It is why you need to learn how to use it if you’re always working with electronic kits and circuit boards.

What Are the Advantages of Using a Solder Sucker?

Tips to Ensure Efficiency of Desoldering

Keep reading in the following for tips on how to make the process of desoldering easier.

Using a holder for the circuit board

Using a holder for the circuit boardBesides a good soldering iron, you also need a quality circuit board holder.  It should keep up well and hold the circuit board in place.    It is wise to buy and use a holder that is strong and firm enough to hold the circuit board when you’re working with a PCB.

Using a reliable soldering iron

Using a reliable soldering ironYou need a reliable soldering iron, which is available in different designs. However, you must choose one that you can work with easily. You also need to consider the efficiency of the soldering iron.  For example, you might want to go for a soldering iron with a screen temperature radar. it can heat fast and has an on and off switch.

In addition, you might want to check one that has flexible cables, allowing for easier movement especially when working on a small area.   Also, you must check for a clean tip to ensure heat conduction.

More so, go for a soldering iron that can offer durability. It is to ensure that you’re getting more of your spending.  Other features to consider are a temperature readout and the wattage of the device.

Nevertheless, you must also go for a soldering iron with a high-quality and avoid cheap ones that will not last.  So, while you can be spending a little more with a higher quality soldering iron, you can save in the end for not having to replace the device sooner.

Using enough solder

It is important to use enough of it to ensure that it will not be hard to remove a part from a circuit board. Not using much of it will result to it not melting.    But with more solder, you can remove a solder easily from it if you need to.   If you also add more solder, you will have more time to remove the component because the liquid can stay in its form for a long time.

Detaching the circuit board

You must do it in a well-ventilated space. Remember, heatsinks can be hard to desolder due to their quick heat absorption property.   What you can do is to detach the circuit board immediately.

These are only some tips that can ensure the efficiency of desoldering and save you time in the process.

There you have what you need to know about how to use a desoldering pump easily and quickly. Follow these steps and tips to work with boards and kits better.  For the best results, use a good desoldering pump that can streamline the process of desoldering. Good luck and hope you learned something in this post today

Leave a Reply

Your email address will not be published. Required fields are marked *